PERFORMANCE DATA AND SPECIFICATIONS

Brightness
• 6000 ANSI lumens (+/- 10%)
• 90% brightness uniformity across the screen
  

Contrast Ratio (1.5-2.2:1)
• 350:1 ANSI; 500:1 On/Off
  

Resolution/Digital Processing
• 3 chip 0.9" DMD™ (Digital Micromirror Device) system
• True XGA 1024x768 chip resolution
• 13 bit user selectable gamma table
• More than 1 billion displayable colors
  

Dynamic Scaling
• Resizing capabilities to scale down from 1600 x 1200 and up from 640 x 480 to the SXGA resolution of DMD™
• Independent horizontal and vertical scaling adjustment for graphics and video inputs
  

Horizontal Frequency
• 15 to 120 kHz
  

Vertical Frequency
• 24 to 120 Hz
  

Field Interchangeable Optional Lenses
• Fixed short throw lens 1.2:1
• Zoom lenses: 1.5-2.2:1, 2.2-4:1 and 4-7:1
• Up to 130% of vertical lens offset for off-axis projection (using a 2.5-4:1 lens)
• Up to 80% of horizontal lens offset (using a 2.5-4:1 lens)
• Compatibility with VistaGRAPHX lenses: 0.8:1, 2.5-4:1, 4-7:1 (adapter required)
• Screen size 1.5m - 12.2m (6ft - 40ft) diagonal
  

Lens Mount
• Motorized horizontal and vertical lens offset, focus and zoom adjustments
• Lens "bayonet-style" insertion system
• Lens mount tilt adjustment
• Built-in light shutter
  

Inputs
• Built-in RGB/YUV/YPbPr inputs allowing separate H and V syncs, tri-level sync, composite sync and sync-on-green/luma (5 BNC connectors)
• Multi-standard (NTSC, NTSC44, PAL, PALM, PALN, SECAM) video decoder module provides 1 composite video input w/ loop through via BNC&RNA connectors, 1 S-video input w/ loop through via 4-pin DIN&BNC connectors
• Slot for an optional input module
• Full compatibility with Marquee Signal Switcher and third-party switchers
  

HDTV/DTV Compatibility
• Full HDTV/DTV compatibility on analog RGB/YPbPr inputs
• Accepts 480i, 480p, 576i, 576p, 720p, 1035i, and 1080i formats at all applicable frame/field rates
• Accepts 1080p at 24, 25 and 30 Hz frame rates
• Optional HDTV Serial Digital Input Module
  

Various Keypads
• Standard hand-held IR backlit remote keypad, front and rear infrared sensors
• Built-in backlit keypad
• Optional RS422 two-way remote controller with LCD display using 6 pin XLR connector with range of 3000 ft
• Optional wired backlit remote keypad with 3 pin XLR connector
  

Control/Networking
• Third party control system and switcher compatibility
• Dual RS232 ports for computer control, with loop through for connection of multiple projectors
• Dual 6 pin XLR RS422 ports for connection of optional LCD two-way controllers and loop-through to multiple projectors up to 600 ft (183 m)
  

Diagnostics
• Built-in LCD diagnostic display indicates operational status and error messages
• Power and Status LED
• Full diagnostics through RS232 9 pin D connector
  

Graphical User Interface
• Auto Set-up feature
• "Direct Access" intuitive user interface for complete projector control in 5 world languages
• On screen user movable menus to fit different image aspect ratios (4:3, 5:4, 16:9, etc.)
• On screen help menus
• 100 channel memories
• Auto power feature
  

Lamp Specification/Color Temperature
• 1200W CERMAX Xenon® illumination system
• Pre-aligned lamp module
• Constant color temperature over the lamp life
• Color temperature range 3200K to 9300K
• User replaceable lamp within 5 minutes
• Typical lifetime: 1000 hours
  

Variable Lamp Power Supply/Light Output Control (LiteLOC)
• "Auto Brightness" mode to maintain constant brightness over time
• "Lamp Conserve" mode to extend the lamp life
• "Max Brightness" mode for maximum light output
  

Power Requirements
• Line voltage 220 VAC to 240 VAC +/- 10% @ 50/60 Hz
• Power consumption: 1700 W maximum
• Thermal dissipation: 5150 BTU/hr
• Operating current: 8.5A maximum
  

Weight and Size
• 92 lbs. (41.8kg)
• 56.6 cm (W) x 76.5 cm (L) x 30.2 cm (H) excluding handles
• 22.28" (W) x 30.1" (L) x 11.88" (H) excluding handles
  

Standard Accessories
• IR remote keypad with batteries
• User's Manual with warranty card
• 2.44 m (8 ft) line cord
  

Optional Accessories
• Serial Digital input (SMPTE 259M/CCIR 601) with loop through feature
• Digital HDTV input module (with loop through feature) compatible with all known HDTV formats
• DVI/DFP input module
• 10 bit ADP (Advanced Digital Processing) module
• Wired remote keypad
• Compatible with all Marquee input modules
• RS422 Two-way remote LCD controller
• Replacement lamp kit
• Remote infrared sensor
• Service Manual
• Librarian communication software
• Transit Case
  

Regulatory Approvals
• CSA, UL and European safety approvals
• North American and European EMI/EMC approvals
  

Warranty
• Two years parts and labor on projector (with RoadSERVICE membership)
• One year on projector light engine
• Accessories: one year
• Extended warranty available
  

Third Party Test Criteria
• ISTA, IEC 60068-2-64 , ASTM D4169-96, MIL STD 810F (Shipping Vibration & Shock, while in Christie Digital Systems Transit Case)